Prusa MK3S (MK3S+) Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief

Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers.

Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.

After finishing my design for the Prusa Mini Pi camera mount I wanted to have the same features on my MK3S. I was always bumping my camera mount knocking in out of position and would not know until I was viewing remote. This became frustrating so I wanted something that has a fixed point of view, is low profile so it will stay out of my way, and was in keeping with the design of the printer.

The X axis strain relief was added in for good measure however there is an option to print without.

Features:

• Compact
• Simple no moving parts
• Fixed Angle
• Cable Management
• Designed to blend with the design of the printer
• Optional X Axis Cable Strain Relief

Required :
1 - Wire Tie 165x2.5 mm
1 - M3 x 18 Bolt
(Both Found in MK3S Spare Parts)

Print instructions

No supports needed.

Note:
Two versions

• With X Axis Cable Strain Relief
• Without X Axis Cable Strain Relief (code found under User Print Files