Campervan Tablemount Challenger/Chausson (most of Trigano and others)

they often break off, delivery availability is poor, good if you can print them yourself
4
74
0
518
updated May 3, 2023

Description

PDF

There are few things as annoying as broken parts for which you can't get a replacement. It is especially stupid when the part you need plays a central role. For example, the mounting for the table in the dinette of the motorhome or van.


The friendly dealer often says "delivery time unknown" or "it may take a while". 
How should you use your vehicle now? How can you drive off if the table can no longer be fixed?


But that's over now! Simply take a 3D printer with you on your travels and print out the part you need. It's that simple.

...of course you can also print it at home and take it with you just in case.

First pic shows original parts presumably ABS Injection molding

Second pic shows my first print with PETG left and PCTG on the right. Both came out quite nice. Print orientation as shown, Bambu X1C "0.2mm Strength" with 6 outlines and 20% fill. 
 

Tags



Model origin

The author marked this model as their own original creation.

License