Customizable Jabra Elite 7 Pro case cover

This is a cover for the Jabra Elite 7 Pro case  (I imagine it would fit the 7 Active too).

Easy print in two parts (top and bottom), then use Bi-adhesive tape to fix the case in place.

I used thick bi-adhesive tape, so the cover could not fit perfectly for you. In case, play with the x, y, and z multipliers in your slicer.

The cover_bottom_ring is designed such as the ring has the maximum mechanical strength.

Feature

• Print in two parts: cover_bottom and cover_top
• Full protection
• Bottom cover with and without hanging ring 
• Easy grip to open the cover

Print tips

• Use the ‘fuzzy skin’ mode in Cura for a better grip
• Use gyroid infill for better shock-absorption
• Printed with 2 or 3 perimeters
• Use supports just for the bottom cover (for the USB-c plug-hole)
• To fit better your case you can play with the x,y,z multipliers in your slicer

Customize your cover

• You can find the step file with the models of the case and cover to customize as you want

Note

The USB-c plug-hole has been improved to better show the led light, so it is not the same as in the picture.

Enjoy!