Simucube PSU holding brackets

Brackets are designed to hold the 230V 300W Simucube 2 Pro PSU. Designed to be fastened with screws to a flat surface. I use them to mount my PSU to a wooden simrig. The model's height is designed to slightly compress the foam rubber feet that are on the PSU to ensure a snug fit without rattling noise. Be aware of this when mounting it on anything other than a flat surface.

There are 2 different brackets to accomodate different cables.

I printed them upside-down with PETG on a prusa i3 MK3S+ with PEI printbed. No supports are needed this way.

Since I printed them I made a small adjustment since the 48V cable did not fit through it's opening due to the ferrite core of the cable being too big. I filed away a bit of material on the print but since I updated the model this should not be necessary.

Not a very common item but maybe somebody will benefit from it.