Creality Sprite/Sprite Pro 4010 Hotend Fan

I wasn't happy with the 4020 Noctua fan, so I decided to use the 4010 that  came from the part cooler on the hot end. It's a lot more tolerable than the stock fan, and will be a good upgrade for anyone that has an extra 4010 fan laying around.

CR Offsets - 0Y ,  X-49

Print instructions:

0.12 layer height, 3-4 walls, 0.4 line width, 35% infill grid, PETG or better. 

Build Instructions: 

For the fan - use the shorter screws that came with the stock part cooler to mount the fan.  The fan is a tight fit, so you will need to slip it on. 

To mount the bracket, use 2 m3x6 screws for the CR side, and the normal screws for the rest. 

CR will need a m3x5 and 2 nuts. 

Step files and model will be for  sale on Cults3D.