O-Ring printer feet.

Ive wanted to make some clean feet for my printer. 

Only at the local hardware shops they didnt had any nice rubbery feet for a printer. 

Ive looked at the baseplate of my voron printer and thought that it could be a good idea to make round feet on O rings. 

There clean looking, easy to print and can be fitted under a Voron or any other extrusion based printer. 

Ive added: 

28 mm O-ring feet with a M3 hole

28 mm O-ring feet with a M5 hole 

30 mm O-ring feet with a M3 hole

30 mm O-ring feet with a M5 hole

print the part with the flat side on printbed. the o ring part needs to face up. 

You wont need any supports.

You only need to get 4 O rings and some CA glue to glue the o ring on the feet. 

Pro tip. Print 5 feet and use a clamp. add glue in the feet, place o ring, place other feet part and clamp it together for perfect finish.