LED controller of the auxiliary light in BambuLab X1C or in Studio/App

Now you can control the auxiliary light on the printer over the application (BambuStudio or Bambu-App) or directly in the printer. Uses the power of the original light on the printer as a trigger to turn the auxiliary light on/off.

Here is present not so the model, but the idea of the auxiliary light control. You don't need to remove the original LED and cable, so you can easily return it to its original condition.

See a short video on youtube for how it works here

You need:

1. 1x 5V One Channel Relay Module
2. 1x JST 1.25mm 2-Pin 
3. Cable is 40 cm, but if you buy a JST, you can solder a cable from them
4. 1x COB LED Streifen 2m (The connector fits the parameters of the model)
5. 1x Crimpzangen and ferrules (optional) if you do not want to use solder

Assembly:
It is very simple! Connect relay as shown on pictures and insert jst 2-pin cable in original LED power supply.

On the scheme is displayed normaly closed connection for relay. It up to you

If you need to update some parameter and dont want create your own box, write me and i give you the f3b model.

Model for auxiliary light  Bambu Lab X1C Top Glass Riser - PIP - NO TPU made by GamingFaxe or something similar.

Want to buy me a Slice of Pizza or Coffee? Donate