Prusa Bear PSU Replacement Brace with Inserts

Looking for a bracket to replace the power supply, I came across a nice hughs project “Prusa Bear PSU Replacement Brace”  However, I wanted to give it some shine :) So I redrawn it in Fusion360, replacing the rounding with chamfers and adding colored inserts. 

3D printing of inserts needs supports because it has an undercut for the frame support.

Will be needed

3x M5 x 10 mm bolts

3x M5 tee-nuts

Print settings:

Material: PETG
Infill: 20%
Perimeters: 4 
Layer height: 0,2 mm
Support: brace - no , inserts - yes