TP-Link ER605 3U Rackmount Adapter for 10-inch Network Cabinets

This rackmount adapter is designed to mount the TP-Link ER605 wireless router in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be easily attached to the TP-Link ER605 using two 3mmx8 screws and two 3mm nuts.

Please note that due to the limited print bed size of the Prusa MK3S+, the frame is 4mm shorter than the standard 10-inch size (254mm). To ensure a proper fit, it is recommended that you print the design without a skirt (minimum loops = 0) and use 100% infill for added strength and stability. 

Please note that I recommend printing the model with a 6mm nozzle. While tolerances with a 0.4mm nozzle have not been tested, it may not provide the desired results. It is also recommended to remove the model from the printer bed while it is still warm to prevent damage to the coating, as the model has good adhesion to the printer bed.

If you have any suggestions or ideas for improving this frame, please feel free to contact me.