Remix with touch button and DC-Socket of BambuLab X1/C Ventilation with LED

This is remix of the great frame design from Marwyn for the BamubLab X1C. I used the version for the thicker TPU insert. 

I added two holes in the rear left and front left frame for installing a DC socket and a touch button. Also added two holes for cable management. Connect them to the 12 V or 24 V LED stripes. You can switch on and off the light now by touching the button.

Here are the links to the DC socket and touch button I used.

10.7 mm DC Sockets

16 mm Touch Button

I also reuploaded the unmodified stl of the other two frame parts.