Magnetic Screw Trays
These are trays for small parts that use inprinted magnets to hold all of your screws, nuts and bolts
In the contest Models with Magnets
21
20
0
315
updated November 4, 2023
Description
PDFIt is recomended to print at 0.3mm layer height. (there isn't any detail to print)
- In V1 if you print at the recomended layer height of 0.3mm you will need to add a colour switch at the 27th layer. V1 uses 6 of the 24x8x10mm magnets.
- In V2 if you print at the recomended layer height of 0.3mm you will need to add a colour switch at the 20th layer. V2 uses 4 of the 20x3x8mm magnets.
If you have other sizes of magnets, feel free to remix this model or let me know and I will happily make it for you.
Tags
Model origin
The author marked this model as their own original creation.
