VAG Fuel Cap Ring (Audi VW Skoda Seat)

This is a replacement ring for the OEM one that rotates on the fuel/gas cap on VAG cars, in case it's lost/broken. It goes together with the latch [LINK] to complete the system that holds the fuel cap when refuelling. 

The whole where the latch enters will need some cleaning after printing. As the original system is held together with two pins, if you have lost them, you can always use a cut toothpick (see pictures). If you have the original pins, the holes on the print may need to be cleaned to fit properly.

Print settings:

• 0.1 Detail;
• 15% infill;
• I prefer 3 perimeters, but two will do as well;

Happy printing!