Car Tire Storage Tags (Remix)

I used the same concept but designed a slight variation.  

• The tabs in the valve stem hole broke on me so I used a solid hole.  This requires that the stem cap needs to be removed in order to install but it's a minor inconvenience.  
• I added the word “Off” so that I would remember it came off of that particular corner of the vehicle.  Otherwise, I would never remember if it was indicating that it came off that corner or it needed to go on that corner.  :)
• Also changed the letters to be DR (Driver Rear), DF (Driver Front), PR (Passenger Rear) and PF (Passenger Front).  Again, because I would never remember if Right/Left was looking from the front or the rear.

  I printed mine in PETG, 0.35mm layer height and 100% infill.