Mini Maze

he Mini Maze is based on the 3D-Maze V2. It is a smaller version with simpler actuators.
The path has been extended a bit.

The object is to move the "actuators" from one corner to the other.
You have to figure out that a possible movement in one dimension can be blocked in the next one.

The actuators are made from a round piece of wood 4 mm in diameter. You can find this in DIY stores. When you manage to print 4 mm rods let me know how.

Print instructions

Category: Puzzles Summary

he Mini Maze is based on the 3D-Maze V2. It is a smaller version with simpler actuators.
The path has been extended a bit.

The object is to move the "actuators" from one corner to the other.
You have to figure out that a possible movement in one dimension can be blocked in the next one.

The actuators are made from a round piece of wood 4 mm in diameter. You can find this in DIY stores. When you manage to print 4 mm rods let me know how.

Print Settings

Printer: Da Vinci Mini w

Rafts: No

Supports: Yes

Resolution: 0.2 mm

Infill: 10%

Notes:

I did have to fight warping, so use your own experience to prevent warping of the components during printing.

Post-Printing

The actuators are made from a round piece of wood 4 mm in diameter. You can find this in DIY stores. Cut 1 piece of 112 mm length and 4 pieces of 56 mm length. Assemble it in the „center“ object inside the box before you glue the top on.