ZX-Key Case for ZX81 Keyboard Addon

If you've bought the wonderful ZX-Key keyboard interface and keyboard from ZX81 Keyboard Adventures and want a case for it that prints on a Prusa Mini, then this is for you!

But also if you have a bigger printer then I've included parts that print complete.

Where to get a ZX-Key:
https://www.zx81keyboardadventure.com/p/zx-key-keyboard-guide-book.html

Both Versions

No supports required for this print!

Use 10x M3 20mm bolts to join the case together.

Don't forget to print the button.

Split Version

Print the joiners and glue them in the most appropriate places so they hold the lid and base together.

Full Version

This is 225mm wide so make sure your printer can print this size. On some printers you can actually slightly exceed the official build size, especially if you turn off the skirt.