Dahua VTO2202F Mounting Box

Recently, I purchased a Dahua video doorbell, but it didn't come with a mounting box. Not wanting to spend over $20 for one, I decided to design and create one myself. The box I designed has M4 screw holes on the back, which are spaced 60mm apart, enabling it to be mounted on a standard 86mm electronic box. You will also require two M3*10 round head screws to secure the doorbell inside the box.

I printed this without support, using Polymaker PA612-CF filament to withstand the heat from the doorbell and the sun. If you intend to use it outdoors, it's recommended to print it with ASA filament.