IKEA Skadis Spool Hangar

This is a simple bushing and roller assembly to hang a roll of filament on a Skadis pegboard.   Requires (2) 608 bearings and (1) IKEA Skadis 3 ¾" hooks (maybe 95 mm? Not sure how they're advertised in metric).  

The outboard bearing should slide along the stem to accommodate different widths of filament.  
 
1) Print (2) BearingRollers and (1) Stem per hook.

2) snap the Stem onto the Skadis hook, with the flange towards the pegboard side.

3) jam the bearings into the BearingRollers.  

4) slide the bearings into place on the stem/hook assembly

5) hang and print!