FLSun Q5 1/4-20 camera mount

A mount system for the FLSun Q5 for cameras using 1/4-20 UNC threaded mounts.

I haven't had any luck finding one, so I cobbled this together from parts of a few different models.

You'll need:

• 3 M5 x 20 bolts
• 3 M5 hex nuts

Everything except for the mounting bolt was printed with normal settings (3 perimeters, 4 bottom layers, 4 top layers, 15% infill)

Bolt was printed with 6 perimeters, 8 bottom layers, and 8 top layers. Probably overkill - but at only 14 mins to print I figured why not.