- Step 1: Print all parts (2x hooks, 4x inserts, 1x cable tidy). No rafts or supports are needed.
- Step 2: You'll need a piece of wood with the following dimensions: 250x80x20mm
- Step 3: Drill 4 holes into the wood using a 45mm drill. Leave 20mm space left and right, so the hooks won't interfear with the holes.
- Step 4: Simply glue the hooks and inserts into place. As the airwrap isn't very heavy, there is no need to use screws.
- Step 5: Use some double-sided tape to mount everything against the wall.
- Step 6: Use the cable tidy if you want your cable to be organized.
Tags
The author marked this model as their own original creation.