PLA is suitable for printing. A layer height of 0.2 will be enough.
Use support material to print the cross-core.
You need 108 4x2mm magnets for assembly. Use glue to secure the magnets inside.
!!! For the correct operation of the cube, it is important to place the magnets correctly !!!
Place the magnets ONE SIDE into all holes of the core and edges
Put the OTHER SIDE in all holes of centers and corners
Turn the cube carefully and without sudden movements. It is necessary to grab the side with the whole palm. Do not turn the side of the cube if you are holding only a few elements with fingers.
You can put on colored stickers and use the cube as a real puzzle
The author marked this model as their own original creation.