Spacer/gasket for Phanteks D30-120 fans and Corsair XR5 Radiator

The screw depth on my Corsair XR5 360mm Radiators was very inconsistent, ranging from 3mm-5mm. Using 35mm screws with my Phanteks D30 fans worked for some holes, but ended up damaging the radiator at one corner due to the hole depth being so inconsistent. 

There are two files: one with 1mm thickness at the corners, and one with 1.5mm thickness. The 1mm tended to be thick enough for the middle, but the fans on the ends needed just a little more room on my 2nd radiator.

Filament type: Overture TPU - Black

Printed on: Ender 5 S1