Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief

Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle.

Added x axis strain relief to https://www.prusaprinters.org/prints/45962-prusa-mini-raspberry-pi-camera-module-v21-8mp-moun as suggested by Fanous.

UPDATE: Added a version to support cameras the are 4mm thick from to back at the ribbon cable. The original files supported cameras that are 3.6mm. Please measure your camera front to back at the ribbon cable plug to determine what version to use. 4mm version files are appended with 4mm in the file name.

UPDATE (2):
Berntzone has remixed for cameras that have more spacing between the camera and the board than the 4mm version will allow.
https://www.prusaprinters.org/prints/49125-prusa-mini-raspberry-pi-camera-v21-mount-thicc

4mm GCODE found under User Print Files

Original files support 3.6mm camera at ribbon cable.

Files appended with 4mm support cameras that are 4mm at ribbon cable.

Print instructions

This one does require supports.

UPDATE: Added a version to support cameras the are 4mm thick from to back at the ribbon cable. The original files supported cameras that are 3.6mm. Please measure your camera front to back at the ribbon cable plug to determine what version to use. 4mm version files are appended with 4mm in the file name.

Original files support 3.6mm camera at ribbon cable.

Files appended with 4mm support cameras that are 4mm at ribbon cable.

4mm GCODE found under User Print Files