Ikea Samla 5L Bracket for Pegboard

Mounting bracket for an Ikea Samla 5L bucket on 1" pegboard using Sy's Peglock system.

Designed for 1" pegboard, but should work on 25mm pegboard as well.

I've included two different tolerances for the bracket standoff: Stand Off.stl fits fine on my Prusa MK3S, with a 0.6mm steel nozzle and PLA. Stand Off Loose.stl takes the tolerance from 0.08mm to 0.15 to allow for printers or materials with less precision. 

To mount the Samla 5L you'll need:

• 2x Stand Off.stl or Stand Off Loose.stl
• 2x Bracket.stl
• 2x Board Attachment (Universal).stl

Print settings:

• No supports needed, see 
• PLA seems to be fine, but PETG might be more durable.

Inspired by this bracket:

https://www.printables.com/model/408869-ikea-samla-wall-mount-5l

However I had to create my own profile since the Non-commercial license it used is mutually exclusive with Sy's CC-By-SA.