Indoor plant pot / planter

A simple indoor plant pot and base I designed. Overall dimension is approx' 150x150x150mm (the pot is shorter than the distorted image shows). Can be watered from the base with a narrow spout.

Print instructions

Unassociated tags: Plant pot, planter and base

Category: Decor Summary

A simple indoor plant pot and base I designed. Overall dimension is approx' 150x150x150mm. Can be watered from the base with a narrow spout.

Print Settings

Printer Brand: Any

Printer: Any

Rafts: Doesn't Matter

Supports: No

Infill: 10%

Notes:

If using a 0.4mm nozzle print at 0.2mm layer height with 2 shells and 3 base/upper layers.
Using these settings the print time for the base is around 4 hours, pot about 12 hours.