Voron Stealthburner / SB Arc Reactor Edition

Stealthburner with Arc Reactor

BOM:
- Copper filament : Nobufil ABSx Copper
- Metal filament: ASA DuraPro metallic
- Stealthburner: your filament of choice
- Neopixel ring with 12 leds, 37mm diameter (for example https://www.amazon.fr/dp/B07PFFJ8TF/ref=twister_B0899T5MG3?_encoding=UTF8&psc=1)
 

Instructions: 

Print the parts (obviously)
Brake of the integrated supports of the Arc Reactors back part
Put the two metallic disks together, and clip the copper part. It should snap fit together.
Glue the backpart to the assembly, you should see 3 markings on the rear face helping with the position.

Solder some cables to the neopixel ring, and have them threaded trough the opening on the Stealhburner.
Once trough, solder them in chain with the last led of the Stealthburner.
Place the diffuser ring, and place the Arc Reactor assembly.

Enjoy !