Overly complicated clip to hold the USB cable in place on your Kingroon KP3S Pro.
15
69
0
488
updated April 26, 2023

Description

PDF

I've had a couple of prints fail due to my USB cable being pulled out of the printer (I print with Klipper). So, I made a clip to hold it in place.

The top part will need supports, other than that there are no specific print settings needed. PLA might be too stiff and brittle so I suggest to print with PETG.

Once printed, put the USB B port in the clip and attach it to the ventilation slots on the printer.

Tags



Model origin

The author marked this model as their own original creation.

License