Key for beiter plunger

This is a key for tightening the beiter plunger on your riser. Sometimes the space between the nut and the spring case isn't enough to fit the original key, so I decided to make my own! 

Cool adition to the original key it has a hole so you can kary it as a key chain on your quiver! 

I recommend printing it at 100% as it will be stronger but you can also try it at 80% in gyroid infill. 

You can use wathever filament you wish except of course, flexible ones. 

It takes about 1h to print with slow slicer settings.