Update 01/05/2023
Added “HSW Ez-V1 Foot Type 3 v1.0”
Update 01/05/2023
“HSW Ez-V1 Foot Type-2 v1.0” added for better stability on taller walls and for double-sided walls.
--------------
These feet use the Ez-V1 series clip and therefore require no screws, are designed for easy printing, and print in the strongest direction.
This will work with standard HSW wall pieces but if you are just having 1 piece, see this for single wall pieces with integrated frames: https://www.printables.com/model/460255-hsw-symmetric-singles-with-integrated-fastening-po
If you print the feet with a fibre filled material (I used CF-ASA) and use it with one of the 10mm thick “HD” wall pieces as shown in the pic (which I printed in ABS+), it will be a very tight fit, but will not wobble and be quite secure.
Enjoy!
If you would like to say thanks, you could buy me a few metres of plastic on Ko-Fi otherwise, please post a make and check out my other HSW models in this collection.
The author remixed this model.
Used the base clip and added feet