Kugoo M4 kickstand adapter

I've installed a 125mm shock absorbers and original kickstand became useless because of increased clearance.

Warning!

It's pretty fragile, consider another solution. Some examples here: https://electro.club/m/183820

My own suggestion: take dimensions and lasercut flat steel plate (2-5 mm thick).

Mouting

Use M5 screws to mount it on the scooter. Stock ones will do, but I used longer ones with washers.

Use M5 screws and nuts to mount kickstand. 20mm is enough, but I used a self-locking nuts, so I needed a 25mm screws (22mm would be perfect, 23mm with washers)