Prusa SL1S Vat Holder

A resin vat tower that can be mounted on a wall or simply placed on a table (if you have secured it properly and accidental tipping cannot occur.).

Attention!
Prusa says to pour the resin back into the bottle after each print, if you want to do that it's fine. But this vat holder was created for the opposite of that, I always leave my used resins in the tray, I the vat replaced. But the main thing is that before every print, I mix it with a silicone spatula, this helps some types of resin to print more easily, and if I feel that there is some residual material, I pour it back and check the tray. Therefore, everyone uses this at their own risk.

Bottom Cover: Is a cover that can be placed on the bottom of the vat, which prevents unwanted light, protects the fep, and makes it easier to pull the tray in and out.

Decorative hexagon: Small hexagons that can be snapped on the inside, which add to the appearance and help to make it easier to identify the resin in the tray

Box: Similar in size to the resin tray, it fits into the container of the resin tray, you can keep small things in it.

• Material: Black Petg // (Hexagon) Several Type Petg
• Layerheight: Various Layerheight
• Support: No