Test tube vasemode vase

After printing you will need to apply a little force to get the test tubes it. They fit pretty snugly.

You can print this not in vase mode but you might have to scale it up a couple percent as to get them to fit as a solid print wont have the flexibility of a vase mode print

If you have different sized test tubes you can scale this accordingly. For example: 

• 10mm test tubes 10/11.8 = 85%
• 13mm test tubes 13/11.8 = 110%
• 16mm test tubes 16/11.8 = 135.6% 
• 20mm test tubes 20/11.8 = 169.5%

I designed this to be printed with the following settings:

• .6 nozzle 
• vase mode
• .2 layer height