A full heat shield around the nozzle - the fun way!
A small wall between the M.I.N.D.A. probe and the nozzle
And a snap on cover with holes for googly eyes
First of all, huge credit to the original designers:
@Skreelink - I've based this remix on his V2.
@Mathieu - I've based this remix on his V3.
All I did was to make sure that those two parts can fit well together.
and I've also added holes for googly eyes (12.3 mm diameter). Snap fit, no glue needed.
I've added my own logo on one, but really use the regular one.
There is a link to the source model files in Tinkercad as well.
3MF files are added with my custom supports.
But you can use the STL as normal.
G Codes are only for time and cost estimation, please don't use it. every printer is different, and you should NOT trust g codes you find online.
supports are needed.
please look at the 3MF file to see the custom painted one
DO NOT PRINT THE GCODE FILES, they are for time and cost estimation only.
PETG seems like the logical choice.
The author remixed this model.