Magigoo Holder for Ikea Skadis Board

I ordered a set of ARC-PEGLAGO panels for my P1P so I needed a way to attach things to it. This is the first model I've created so that I can attach Magigoo to the printer.

To attach the holder to the Skadis panel I used the excellent Skadis T-Nuts Mounting System. I've provided both the original M2 T-nuts and my own remix that uses heat set inserts.

You will need to print the Magigoo holder and two of the T-nuts of your choosing.

Required hardware

(2) M2 x 12-14mm socket head screws
(2) M2 nuts (if using the M2 nut version of the T-nuts)
(2) M2 x 3.0mm L x 3.6mm OD or (2) M2 x 4.0mm L x 3.6mm OD heat set inserts (if using the heat set version of the T-nuts)

* Some of the links above are Amazon Affiliate links
 

Get your Prusameters… Post your Makes!

If you like this project, please don't forget to  ❤ Like  and  ★ Rate!