This is a multi-piece print with the use of off the shelf components. I designed this as a way to agitate a large amount of 99% IPA without the need for electric motors. Intended to be installed on a 1.5" piece of aluminum t-slots.
You will need:
1x of each of the STL files 1x Shoulder Bolt 2x Bushings - Note: This is not the exact part I used but has the correct dimensions 1x Tube Fitting 1x Flow Control Muffler 4x 10-32 Button Head Screws 4x 10-32 Hex Nuts 1x ¼-20 Hex Nut 1x ¼-20 Lock Nut 6x Magnets 1x 608 Bearing
I found that once assembled with these particular magnets, a 0.55" gap between the magnet holder and propeller work the best without causing too much deflection of the magnet holder.
https://youtube.com/shorts/IPX5m7VjHJI?feature=share
The author marked this model as their own original creation.