Bike Beer Clip for 12oz, 355ml, and 330ml Cans

Inspired by this design. I didn't like the latching mechanism and it was very hard to print due to some poorly designed internal overhangs, so I decided to redesign it. My design leans more into the spring force of the clip to hold the can in place, but it seems to work well enough. I'll admit it's not as sleek as the original but I've included the source files if you want to remix it.
 

Print Settings

Print it on either long side (so the zip tie holes are oriented vertically). No supports. I recommend PETG or possibly ABS/ASA.