spiggytech wire management combs

EDIT! 4/26/2023: Added a variety of combs that curve width-wise for a more fanned out look. 

These are combs in varying degrees of bend for the purpose of management in a “hard line” style. The type of cable been tested on are EVGA custom cables and Corsair SFX braided cables. 

Each bent comb is set for about 45 degrees or 15 degrees, in diameter of about 28mm. Depending on your type of cable, you can probably manage that down.

I recommend using the thin cable managers for the PSU and CPU cable if you're inside a chassis.

lay flat, print at 100% concentric infill. PETG+ recommended

If you like what I do, or have suggestions and requests, please let me know!