8020 series 10 45 degree ofset beam for fan mount

As part of my reflow toaster oven project I need a way to mount a fan at an angle. The beam can be use mount things and sensors at a 45 degree angle to another beam. A word of caution, we do not usually use printed beams for structural purposes. Use at your own risk.

The fan mount can be found here:

https://www.thingiverse.com/thing:4621872

https://www.prusaprinters.org/prints/46141-8020-fan-mount-for-120-mm-fan-43mm-wide

or if you want to mount the fan directly to a beam:

https://www.thingiverse.com/thing:4621888

https://www.prusaprinters.org/prints/46140-8020-fan-mount-for-120-mm-standard-width

It is compatible with 8020 series 10 end connectors and t-nuts. It is also possible to use a standard 1/4-20 pan head screw in the end of the beam. The beam is printed tapped for a screw.

It is a derivative of: https://www.thingiverse.com/thing:3589546

Print instructions

Category: Electronics Summary

As part of my reflow toaster oven project I need a way to mount a fan at an angle. The beam can be use mount things and sensors at a 45 degree angle to another beam. A word of caution, we do not usually use printed beams for structural purposes. Use at your own risk.

The fan mount can be found here: https://www.thingiverse.com/thing:4621872 or if you want to mount the fan directly to a beam: https://www.thingiverse.com/thing:4621888

It is compatible with 8020 series 10 end connectors and t-nuts. It is also possible to use a standard 1/4-20 pan head screw in the end of the beam. The beam is printed tapped for a screw.

It is a derivative of: https://www.thingiverse.com/thing:3589546

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: Yes

Supports: Yes

Resolution: 0.2

Infill: 25%

Filament: Inland PLA black
Notes:

I used red fillament because I don`t have black filament at this moment. Will paint it in black color, not a big deal)))