THWACK

Awesome, perfect for our linux team. Recycled PET + PETG filament, 0.2mm layers and lots of perimeters and infill.

Red PLA. Printed 100% infill, very solid design.

My first time using PC blend. I used glue stick on the satin spring sheet and still got some warping.
Prusament PC Blend
Width: 0.6
Height: 0.2

One of my first prints, and one of the most useful. Done a lot of thwacking with this guy.

Printed in PETG - Does the job it should perfectly, very nice model (edited)

Made it quite a bit bigger. .3 layers and on fast settings. Also made the handle 50% infill up until it starts to narrow. 5 walls and 8 top and bottom shells. Tested it out and seems strong and works well. Used about 200g of pla+ and printed in around 3 1/2 hours.

My son repairs everything now! :-)

Printed mine in orange PETG for added durability and to make it harder for me to lose. Great for assembling 3D printed pieces with tight tolerances.

Nice design, I love the Sudo. I chopped the ball off of the peen so I can have 2 flat sides.
Printed in Polymaker ASA