Manta M4P - Sovol SV06 (Plus) Case + Mount

Modified version of the case to use a 92mm fan on top and use to the original mounting points on the SV06. Has a little shelf at the top to fix the extruder flat cable with a zip tie. Optionally can mount an SMA extension for an external antenna next to it.

Lid mounts with 4x M3 10mm screws.

Fan mounts with 4x M3 27-30mm screws (and washers).
It is also possible to mount it with ~10mm M3 screws if you can screw them in the side of the fan adjacent to the case.

Mounting to the SV06 is tool less just like the original case. The mounting holes will probably need to be filed a bit because of the overhang. Fits just fine otherwise.

More info for the conversion here: https://github.com/LsHallo/sv06-plus-manta-m4p