Heat Gun Stand

This stand was made for the Drill Master "heat gun" hot air blower sold by Harbor Freight, but likely this hot air blower is also sold under other names by other vendors. Often there are times when it is useful to stand the heat gun on end so one can work with both hands, but if you do this with many heat guns (mine included) it blocks the air intake.

This little stand holds the heat gun in a vertical position and elevates it from the bench top so that air can flow into the intake. I made the walls a little on the thin side to save on filament and reduce the print time, but it is still more than sturdy enough to hold the heat gun.

The OnShape 3D CAD files are here :

https://cad.onshape.com/documents/248b15fb86863c75639c5a96/w/8d97e303ea34db1838462730/e/7e57fb20a7e8a57a1206348c

Print instructions

Print in PLA using the provided 3mf file; otherwise :

• 10% rectilinear infill
• perimeters = 2

Print upside down as show in the photos, with a support enforcer under the handle support.