Tools stand Improvement

I bought from a Cinese online store a tools stand for my desktop, but I realize when using that always my tools doesn't fit as I like in that kind of stand. I design few 3D print accessories to improve the capability to keep the tools in order.

Tips: Try to play with contour compensation in your slicer to find the perfect size for fitting. In my case I set +0.11mm for outside contour. It depends from the calibration of your printer.

Trick: In case you print with too much play the tubes and you want to improve the stability, use a couple of O-ring to keep the tube in place (see my picture below)

Parts List:

n.15 X Tube n.1 -  (outside diameter 13.5mm; Inside diameter 12.5mm; lenght 107.5mm) 

n.1 X Tube n.2 - (internal diameter 19.8mm; inside diameter 18.8mm; lenght 59.5mm)

n.2 X Small box - (large 34.9mm; withd 9.9mm; lenght 56mm)

You can print any material you like, 

In my case I Printed in  Yellow Esun ABS on Bambu Lab X1C

Printing informations:

I printed Yellow Esun ABS on Bambu Lab X1C, 0.2 Layer, 261°C; 3 Walls: No Infill; No support; No Others; 6 bottom layer; 6 Top Layer; Fan 0%; Standard speed

Enjoy printing :-)