5v mod for toolhead pcb from Fysetc

how to make Toolhead PCB from fysect works with 5v probes, like VoronTap etc

433

updated April 23, 2023

Description

This is simple mod for Voron Afterburner (can be mounted on Stealthburner too, with simple adapter bellow pcb https://github.com/MotorDynamicsLab/LDOVoron2/tree/main/STLs/LDOSBCW2MountCover ) PCB board from FYSETC “ FYSETC-Afterburner_Toolhead " which is very usable for 5v only PCB v1 Voron Tap Probe (which, as I think, is better than V2 5v/24v version)
https://github.com/FYSETC/FYSETC-Afterburner_Toolhead_PCB_x
https://aliexpress.com/item/1005004569914022.html etc

This toolhead pcb (with cable!) is added to Voron 2.4/trident kits from FYSETC

After removing Sensor connector white plastic (latter will be inserted again) 24v trace can be cut, and make short cable to 5v at back of pcb. Done.

The author remixed this model.

github.com