Conduit Pipe Cap

This is a simple electrical conduit end cap.  I used this to place over the top end of conduit I used to mount LED canopy lights on my deck.  This keeps things like water and bees out of the conduit when mounted outside.

This model was printed in PETG in draft mode at .3mm and 20% infill.  The cap is a simple friction fit over the end of the conduit.

This model used the PrusaSlicer's negative volume cylinder for the hole placement in the cap. Open the model file and reslice in PrusaSlicer to generate your own GCODE.  I did not include STL files because they don't reflect the Negative Volume feature.