Prusa Mk3S Led light bar

LED light bar that uses existing top Z shaft bracket holes and 24vdc 5050 led strip light. 

Printed on Flat side with no Supports required these were printed at 0.2mm and 15% infill 

Requires

4 x m3x20mm or 25mm cap head bolts to replace existing M3x10 Cap heads.

4x M3 Nyloc nuts 

4x M3 Washers 

1x M3x 6 Button head to join 2 half's together. 

1x M3 x 4mm long Brass heatsert 

2 sections of Led 24v strip light  JOYLIT DC 24V Cool White 6000-6500K Flexible Waterproof LED Strip Lights Super Bright 300 Units 5050 LEDs Light Strip 5m/Reel for Truck : Amazon.com.au: Lighting  . this one has 6 leds per section 

1x Switch with 10mm mounting  5Pcs 12V Waterproof Push-Button On-Off Switch Outdoor Lighting Motorcycle Car | eBay  i had these laying around so worked out great . but any similar type toggle would also be ok .

Light power cable to join together and connect to 24vdc output on power supply.