Corne Keyboard Case

Unicorne - a crkdb

This is the case for the "Unicorne" keyboard. Unicorne is a corne derivative with the following features:

• Semi-wireless (halves are still wired together)
• Single MCU only
• 600mAh for longer life time

The case

The case itself was design with the following design decisions:

• It should have enough space for holding the bigger battery
• The left side should provide a slot which shows the MCU and allows for charging
• The right side should not provide such a slot
• The top and bottom parts should snap together without the need for screws/glue
• All parts should be easy to print - (almost) no support needed

References

• Link to the model on onshape: https://cad.onshape.com/documents/caa1622780e7f1858295ba4b/w/9b37e9e52e35732ec2b3acf6/e/c4c84174b4acb6d08c2fb5b5
• Link to the keycaps used in this project: https://www.printables.com/model/393892-kailh-low-profile-keycaps
• Link to the zmk firmware: https://github.com/fgebhart/zmk-config
• Link to the battery used in this project: https://www.tme.eu/de/en/details/accu-lp304050_cl/rechargeable-batteries/cellevia-batteries/