IKEA Skadis Stand for Heavy Funko Pops

I liked Nifnifs file, but found the stand failed on the upright due to the weight of my Funko Pops. I reduced the weight and thickness of the stand and ran a longer universal hook through the stand and it has been working better for my heavier models.

The stand uses about 30% less material than it's ordinal, but it still is slightly weak on the upright connection. Make sure to file down the hook top so it goes into the stand smoothly as this will lessen the chance of failure. I am using 3 walls to keep some strength in the part.
Make sure the hook is 100%, it should take most of the weight so the stand is for support. From testing, 2 hooks can support a model without the stand as well.

Resolution: 0.2

Supports: Yes

Infill: Stand:25% , Hook: 100%