Had warping due to the sharpish corners that made the fit up abnormally tight.
Still works great and i really like the windows, i wish the model was stackable and had the OAL reduced from 114mm down to 75-90mm to save filament (its wires they can be wrapped).
Good model, im happy with it. Printed on my core one, .4 nozzle with prusament pla.
Super Modell - Hotend passt perfekt, einzig der Deckel ist ein wenig sehr straff, wenn man ihn öffnen will. Das ist aber nichts, was man mit nicht 2 3 Hieben mit der Feile gefixed bekommt.
Printed it in PLA.
The print is easy, top result and the hotends fit perfectly.
Unfortunately the lids are a bit too tight, but that ain't a real issue.
Thanks a lot for this design @TobiausLE!
Fantastic model, the hotend fits perfectly. Printed with default settings using Bambu Lab dark blue matte PLA using the high temp bed for a smooth top.
Printed on P1S with Overture Transparent PETG with .4mm nozzle. Still getting the settings correct for the filament. Box dimensions are spot on. (edited)
