I needed to record to a T5 SSD from a Blackmagic Hyperdeck that is mounted in a Teranex Shelf. The Teranex shelf comes with 2 blank spaces for when you only have one device to fit ⅓ of the rack space. This will take up one of those spaces, and use the same screw holes as the blanks would. The mounting holes have inserts for 4-40 nuts for both mounting to the plate, and mounting the cable clip in the back.
Print on one side with a brim and paint on organic supports to the fins. The large fin will print without supports, but it needs some help with stability as the weight shifts back.
The author remixed this model.