Holder for Prusa Enclosure for waste bin or toolholder
for toolholder or bin or anything else. I use for tools and filament waste bin.
6
41
1
422
updated May 12, 2023
Description
PDFto fix on bottom profile (left or right) by screw.
you need:
- M3x8 screw (1)
- M3nS nut (1)
The toolholder bottom is neutral (same for left and right) and can be used for different elements, like the toolholder and the waste bin.
The printed connection bolts to hold are 6mm thick, 40mm appart and 10mm high. The top part holes must be 6.2 to 6.4mm in diameter.
Tags
Model origin
The author marked this model as their own original creation.
