Arecibo - Screwcap

Arecibo - Magnetic bowl for screws and nuts. I designed this bowl to help my colleagues at work in organizing fasteners when repairing computers and small electronics. So that they don't roll around on the table and get lost. This bowl has a small hole at the bottom for snapping or sticking a small magnet with a diameter of 10 mm so that it holds the magnetic screws together and does not spill out in the event of an accident.

We will need 7 tycoons for each bowl. so in order to achieve that from the bowl they will fit together nicely and stick to each other. We drip a little super glue into each magnet hole to hold the magnets firmly.

10x4 mm Neodymium Magnet Super Strong 10mmx4mm Powerful Magnets 10x4mm Permanent Small Round Magnet 10*4 mm

https://a.aliexpress.com/_m0yqtNI

Print parameters
Nozzle: 0,4
Supports: NO
Material: PLA, PETG

>> If you want to buy me a coffee, you can for any amount, I will be very grateful. <<

Don't forget to follow my profile so you don't miss anything. It costs nothing and made me happy. Thanks in advance.

Don't forget to upload a photo of your print and share.
Thank you very much for your support.